Standard Horizon Ff520 User Manual download pdf (Page 32)

Page 34 FF520

5.6.5 Water Temperature

Allows selection between the temperature sensor in the depth transducer and an external

temp sensor connected to the Optional Connection wires.

5.7 TRANSDUCER SETUP

This menu allows you to calibrate the speed through the water, water temperature and the

keel/prop offset of the transducer.

Figure 5.7 - Transducer Setup menu

5.7.0 Keel Offset

The keel offset can be set as to cause the Fish Finder to display an offset depth below the

keel or the actual water depth from the surface. To setup to show the depth below the keel,

enter a negative depth value or a positive depth to show offset from the transducers face

to the water surface.

5.7.1 Calibrate Water Speed

Used to calibrate the Water Speed readings from the transducer. Adjustment can be made

from -10% to +10%.

5.7.2 Calibrate Water Temp

Used to calibration on the Water Temperature sensor in the transducer.

5.7.3 Calibrate Aux Temp

Allows the calibration of the Aux Temperature sensor connected to the Optional Connection

wires.

5.7.4 Set Defaults

Restores the factory settings.

5.8 ALARMS

The Alarms menu allows you to define alarm settings for Shallow Alarm, Depth Alarm and

Temperature Upper/Lower/Rate.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 42 43

No comments

Standard Horizon Ff520 User Manual Page 32