Standard-horizon MATRIX GX3000S User Manual Page 37
- Page / 100
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Page 37GX3000S
11.3 DSC DISTRESS CALL
The GX3000S is capable of transmitting and receiving DSC Distress messages
to all DSC radios. The GX3000S may be connected to a GPS to also transmit
the Latitude, Longitude of the vessel.
11.3.1 Transmitting a DSC Distress Call
NOTE
To be able to transmit a DSC distress call an MMSI number must be
programmed, refer to section “11.2.2 Programming the MMSI.”
In order for your ships location to be transmitted a GPS must be connected to
the GX3000S, refer to section “8.3 ACCESSORY CABLE.”
1. Lift the red spring loaded DISTRESS cover and press the
[
DISTRESS
]
key.
The “DISTRESS” menu will appear on the LCD.
2. Press and hold the
[
DISTRESS
]
key. The radios dis-
play will count down (3-2-1) and then transmit the
Distress call.
3. When the distress signal is sent, CH70 and “ ”
icon will appear on the LCD. After the message has
been sent, the radio will sound a Distress Alarm.
4. The transceiver will watch for a DSC acknowledg-
ment transmission on CH70 and also receive calls
on CH16.
5. If an acknowledgement is received, select channel
16 and advise your distress situation.
6. If no acknowledgment is received, the distress call is
repeated in 4 minute intervals until a DSC acknowl-
edgment is received.
7. When a DSC Distress acknowledgment is received,
a distress alarm sounds and channel 16 is automati-
cally selected. The LCD shows the MMSI of the ship
responding to your distress.
RECEIVED ACK: acknowledgment signal is received.
RECEIVED RLY: relay signal is received from another vessel or coast station.
8. To cancel the DSC distress alarm signal from the speaker, press any key.
- MATRIX GX3000S 1
- Owner's Manual 1
- TABLE OF CONTENTS 2
- 1 GENERAL INFORMATION 4
- 2 PACKING LIST 4
- 3 OPTIONS 4
- Antenna Installation: 5
- ON-LINE WARRANTY REGISTRATION 5
- STATION LICENSE 6
- RADIO CALL SIGN 6
- 6 FCC NOTICE 7
- 7 GETTING STARTED 8
- 7.3 COAXIAL CABLE 9
- 8 INSTALLATION 10
- 8.3 ACCESSORY CABLE 11
- 8.4 CHECKING GPS CONNECTIONS 12
- 8.5 CHANGING THE GPS TIME 12
- “LOCAL” mode 13
- “UTC” mode 13
- Adjusting Screw 15
- Lock-washer nut combination 15
- Figure 2 16
- Figure 3 16
- 9 CONTROLS AND INDICATORS 18
- Radio Setup” 20
- DSC Setup” menu (re 20
- Page 23GX3000S 23
- 10 BASIC OPERATION 24
- 10.6 NOAA WEATHER CHANNELS 25
- 10.7 EMERGENCY 26
- CHANNEL 16 USE 26
- 10.8 CALLING ANOTHER VESSEL 27
- CHANNEL 16 OR 9 27
- 10.9 MAKING TELEPHONE CALLS 27
- 10.11 DUAL WATCH 28
- TO PRIORITY CHANNEL 28
- 10.12 SCANNING 29
- 10.12.3 Priority Scanning 30
- P-SCAN” appears on the LCD 30
- 10.13 PA/FOG OPERATION 31
- PA HAIL mode: 31
- FOG HORN mode: 31
- 10.14 NAVIGATION INDICATION 32
- 10.15 INTERCOM OPERATION 32
- 10.15.1 Communication 33
- Ram1, Ram2, or ALL) with the 33
- Intercom” is displayed on the 33
- Talk” will be 33
- 10.15.2 Calling 33
- 10.16 VOICE SCRAMBLER 34
- 11 DIGITAL SELECTIVE CALLING 35
- DISTRESS 35
- PULL OPEN 35
- 11.2.1 What is an MMSI? 36
- 11.2.2 Programming the MMSI 36
- 11.3 DSC DISTRESS CALL 37
- 11.4 ALL SHIPS CALL 39
- 11.5 INDIVIDUAL CALL 41
- Manual,” 45
- 11.6 CALL WAITING DIRECTORY 46
- 11.7 GROUP CALL 48
- DSC Operation” 50
- Group Directory” will appear 50
- 11.7.3 Receiving a Group Call 51
- 11.8 POSITION REQUEST 52
- 11.9 POSITION SEND 56
- Radio Setup” menu appears 58
- POS Input” with 58
- 12 RADIO SETUP 59
- 12.3 TIME OFFSET 60
- 12.4 TIME LOCATION 61
- 12.5 TRUE MAGNETIC CHANGE 61
- NAV display 61
- 12.6 PRIORITY CHANNEL SET 62
- 12.7 SCAN TYPE 62
- 12.8 SCAN RESUME TIME 63
- 12.9 KEY BEEP 63
- 12.10 WX ALERT 64
- 12.11 VOICE SCRAMBLER 64
- 12.12 CHANNEL NAME CHANGE 65
- Unit Name” in the 66
- Unit Name” menu 66
- 13.1 RAM+ MIC CONTROLS 68
- 13.2 PA/FOG OPERATION 70
- 13.3 INTERCOM OPERATION 71
- 13.4 DSC/RADIO SETUP MODE 72
- Page 73GX3000S 73
- 14 VH-310 HANDSET OPERATION 74
- 14.2 PA/FOG OPERATION 78
- 14.3 INTERCOM OPERATION 79
- DSC SETUP” menu 80
- POS INPUT” with the 80
- 14.5 DSC/RADIO SETUP MODE 81
- Page 83GX3000S 83
- 15 MAINTENANCE 84
- 15.2 FACTORY SERVICE 85
- 15.3 TROUBLESHOOTING CHART 86
- Page 87GX3000S 87
- 16 CHANNEL ASSIGNMENTS 88
- Page 89GX3000S 89
- Channel 16 89
- GX3000SPage 90 90
- Page 91GX3000S 91
- GX3000SPage 92 92
- Page 93GX3000S 93
- 17 WARRANTY 94
- 18 SPECIFICATIONS 97
- FOG HORN TIMING CHART 98
- Page 99GX3000S 99
- GX3000SPage 100 100
Related products and manuals for Boating Accessories Standard-horizon MATRIX GX3000S
(88 pages)© 2020, manymanuals.com. All rights reserved. | 1.765 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals