Standard-horizon MATRIX GX3000S User Manual Page 74
- Page / 100
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
GX3000SPage 74
14 VH-310 HANDSET OPERATION
When the VH-310 HANDSET is connected to the GX3000S, most VHF, DSC,
and setup menus can be remotely operated. The VH-310 HANDSET is supplied
with 23 feet (7 m) of routing cable and can be extended up to 70 feet (21 m) using
three 23 feet extension cables model CT-100. The intercom operation can be
used between the VH-310 HANDSET or the GX3000S.
14.1 VH-310 HANDSET CONTROLS
PWR key
Press and hold down this key to turn to
the transceiver and VH-310 HANDSET
on and off.
PTT
(
Push-To-Talk
)
Switch
Activates transmission.
[
H/L
]
key
Toggles between high and low power.
When the
[
H/L
]
key is pressed while the
transceiver is on channel 13 or 67, the
power will temporarily switch from “LO”
to “HI” power until the PTT is released.
The
[
H/L
]
key does not function on transmit in-
hibited and low power only channels.
[
DISTRESS
]
key
Used to send a DSC Distress Call. To send the
distress call refer to section “11.3.1. Transmit-
ting a DSC Distress Call.”
RADIO CONTROL KEYS
[
VOL
]
key
Activates the volume adjusting mode.
Press this key to activate the volume adjusting mode.
Press the
[
]
or
[
]
to adjust the volume.
NOTE
When the VH-310 handset is removed from the cradle the speaker
audio will be automatically reduced so not to damage your hearing.
When the VH-310 is in the cradle the speaker audio will increase so
communications can be heard.
- MATRIX GX3000S 1
- Owner's Manual 1
- TABLE OF CONTENTS 2
- 1 GENERAL INFORMATION 4
- 2 PACKING LIST 4
- 3 OPTIONS 4
- Antenna Installation: 5
- ON-LINE WARRANTY REGISTRATION 5
- STATION LICENSE 6
- RADIO CALL SIGN 6
- 6 FCC NOTICE 7
- 7 GETTING STARTED 8
- 7.3 COAXIAL CABLE 9
- 8 INSTALLATION 10
- 8.3 ACCESSORY CABLE 11
- 8.4 CHECKING GPS CONNECTIONS 12
- 8.5 CHANGING THE GPS TIME 12
- “LOCAL” mode 13
- “UTC” mode 13
- Adjusting Screw 15
- Lock-washer nut combination 15
- Figure 2 16
- Figure 3 16
- 9 CONTROLS AND INDICATORS 18
- Radio Setup” 20
- DSC Setup” menu (re 20
- Page 23GX3000S 23
- 10 BASIC OPERATION 24
- 10.6 NOAA WEATHER CHANNELS 25
- 10.7 EMERGENCY 26
- CHANNEL 16 USE 26
- 10.8 CALLING ANOTHER VESSEL 27
- CHANNEL 16 OR 9 27
- 10.9 MAKING TELEPHONE CALLS 27
- 10.11 DUAL WATCH 28
- TO PRIORITY CHANNEL 28
- 10.12 SCANNING 29
- 10.12.3 Priority Scanning 30
- P-SCAN” appears on the LCD 30
- 10.13 PA/FOG OPERATION 31
- PA HAIL mode: 31
- FOG HORN mode: 31
- 10.14 NAVIGATION INDICATION 32
- 10.15 INTERCOM OPERATION 32
- 10.15.1 Communication 33
- Ram1, Ram2, or ALL) with the 33
- Intercom” is displayed on the 33
- Talk” will be 33
- 10.15.2 Calling 33
- 10.16 VOICE SCRAMBLER 34
- 11 DIGITAL SELECTIVE CALLING 35
- DISTRESS 35
- PULL OPEN 35
- 11.2.1 What is an MMSI? 36
- 11.2.2 Programming the MMSI 36
- 11.3 DSC DISTRESS CALL 37
- 11.4 ALL SHIPS CALL 39
- 11.5 INDIVIDUAL CALL 41
- Manual,” 45
- 11.6 CALL WAITING DIRECTORY 46
- 11.7 GROUP CALL 48
- DSC Operation” 50
- Group Directory” will appear 50
- 11.7.3 Receiving a Group Call 51
- 11.8 POSITION REQUEST 52
- 11.9 POSITION SEND 56
- Radio Setup” menu appears 58
- POS Input” with 58
- 12 RADIO SETUP 59
- 12.3 TIME OFFSET 60
- 12.4 TIME LOCATION 61
- 12.5 TRUE MAGNETIC CHANGE 61
- NAV display 61
- 12.6 PRIORITY CHANNEL SET 62
- 12.7 SCAN TYPE 62
- 12.8 SCAN RESUME TIME 63
- 12.9 KEY BEEP 63
- 12.10 WX ALERT 64
- 12.11 VOICE SCRAMBLER 64
- 12.12 CHANNEL NAME CHANGE 65
- Unit Name” in the 66
- Unit Name” menu 66
- 13.1 RAM+ MIC CONTROLS 68
- 13.2 PA/FOG OPERATION 70
- 13.3 INTERCOM OPERATION 71
- 13.4 DSC/RADIO SETUP MODE 72
- Page 73GX3000S 73
- 14 VH-310 HANDSET OPERATION 74
- 14.2 PA/FOG OPERATION 78
- 14.3 INTERCOM OPERATION 79
- DSC SETUP” menu 80
- POS INPUT” with the 80
- 14.5 DSC/RADIO SETUP MODE 81
- Page 83GX3000S 83
- 15 MAINTENANCE 84
- 15.2 FACTORY SERVICE 85
- 15.3 TROUBLESHOOTING CHART 86
- Page 87GX3000S 87
- 16 CHANNEL ASSIGNMENTS 88
- Page 89GX3000S 89
- Channel 16 89
- GX3000SPage 90 90
- Page 91GX3000S 91
- GX3000SPage 92 92
- Page 93GX3000S 93
- 17 WARRANTY 94
- 18 SPECIFICATIONS 97
- FOG HORN TIMING CHART 98
- Page 99GX3000S 99
- GX3000SPage 100 100
Related products and manuals for Boating Accessories Standard-horizon MATRIX GX3000S
(88 pages)© 2020, manymanuals.com. All rights reserved. | 3.030 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals