Standard-horizon HX-471S User Manual download pdf (Page 28)

HX471SPage 26

6.5 PRESET CHANNELS (P0 ~ P9): INSTANT ACCESS

Ten user assigned channels can be programmed for instant access. Press-

ing the [PRESET] key activates the user assigned channel bank. If the [PRE-

SET] key is pressed and no channels have been assigned, an alert beep

will be emitted twice from the speaker.

The HX471S provides the ten Preset channel for each individual operating

band (VHF Marine, FRS, MURS, AM Broadcast, FM Broadcast and Air Band).

Programming

1. Select the desired band by pressing the [BAND] key.

2. Hold down the [PRESET] key, and press the [p] or [q] key (repeatedly,

if necessary) until the desired channel number or frequency is displayed.

3. With the desired number displayed, release the [PRESET] key.

4. Repeat steps 2 and 3 to program the desired channels into Preset Chan-

nels “P1” ~ “P9.”

5. To delete a Preset Channel, hold down the [PRESET] key and press the

[p] or [q] key until the Preset Channel number to be deleted is dis-

played, then release the [PRESET] key.

You may add an alpha-numeric name “Tag” to any desired Preset Channel;

refer to CH NAME SET item on the section 13 “MENU (“SET”) MODE.”

Operation

Pressing the [PRESET] key will toggle between Preset Channels “P0” - “P9”

and the last selected “regular” channel. Preset Chan-

nel “P0” is represented by “P0” to the left of the chan-

nel number on the LCD, and preset channel “P1” is

represented by “P1” and so forth.

Press the [SCAN] key while on any of the Preset Channels, the HX471S will

begin scanning the Preset Channels of the selected band.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 60 61

No comments

Standard-horizon HX-471S User Manual Page 28