Standard-horizon HX-471S User Manual download pdf (Page 41)

HX471S Page 39

12. CLONING

The HX471S includes a convenient “Clone” feature, which allows the memory

and configuration data from one transceiver to be transferred to another

HX471S.

Turn both radios off.

1. Connect the (optional) CT-32 Clone Cable between the MIC/SP jacks of

the two transceivers.

2. Hold down the [PRESET] key and then turn on the transceiver. Do this

for both transceivers (the order of switching the radios on does not mat-

ter); “CLONE” will appear on the display on both transceivers.

3. On the Destination transceiver, press the [MEM] key (“CLONE RX” will

appear on the LCD).

4. Press the [16/9] key on the Source transceiver; “CLONE TX” will appear

on the Source radio, and the data will now be transferred.

5. If there is a problem during the cloning process, “CLONE ERR” is dis-

played. Check your cable connections and battery voltage, and try again.

6. If the data transfer is successful, the Destination transceiver will return

to normal operation; Turn both transceivers off and disconnect the Clone

cable. You can then turn the transceivers back on, and begin normal

operation.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 60 61

No comments

Standard-horizon HX-471S User Manual Page 41