Standard-horizon HX-471S User Manual download pdf (Page 40)

HX471SPage 38

11. RESETTING THE TRANSCEIVER’S MICROPROCESSOR

Resetting the microprocessor restores the initial, factory-supplied conditions

in the transceiver. These are called the “default” conditions.

To reset the microprocessor, first turn the transceiver off. Then, while press-

ing and holding in the [WX] and [SCAN] keys, turn the transceiver on.

The default conditions are:

• No channel numbers are in scan memory.

• Channel 16 is the priority channel.

• Channel 16 will be selected when the transceiver is turned on.

• WX channel 01 will be recalled when the [WX] key is pressed.

• Preset Channels are unassigned.

Note: The above procedure also resets the microprocessor. Perform this

procedure if an operational problem occurs which cannot be solved by nor-

mal operating procedures.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 60 61

No comments

Standard-horizon HX-471S User Manual Page 40