Standard-horizon HX-471S User Manual download pdf (Page 31)

HX471S Page 29

7. To start scanning, press the [SCAN] key. The scan proceeds from the

lowest to the highest programmed channel and stops scanning when a

transmission is received. Scanning will resume when the incoming sig-

nal disappears at the end of the transmission. A small “SCAN” icon is

shown on the center bottom of the display during scanning.

8. To stop the scan, press the [SCAN] key.

7.3 PRIORITY SCAN

The priority scanning feature allows the radio to scan while also keeping

watch on a particularly important “priority channel.” The following channels

can be set as the priority channel: 16, 09, and MARINE Preset Channel.

1. To set the priority channel, hold down the [16/9] key and press the [MEM]

key. The channel will change from 16 to 09 to Preset Channels P0 through

P9 with each press of the [MEM] key. When the

[16/9] key is released the displayed channel will

be set as the priority channel (the large “P” icon

will appear at the right side of the channel num-

ber).

2. For priority scanning, hold down the [SCAN] key during normal scan-

ning. Scanning will proceed between the memorized channels and the

priority channel. The priority channel will be scanned after each pro-

grammed channel. A small “PSCN” is shown on the center bottom of the

display during priority scanning.

3. As an example of priority scanning, let us say that marine channels 06,

07, and 08 are memorized in the transceiver’s scan memory. Priority

scanning will proceed in the following sequence:

[

CH06

]

[

Priority Channel

]

[

CH07

]

[

Priority Channel

]

[

CH08

]

[

Priority Channel

]

[

CH06

]

[

Priority Channel

]

……

4. Even when the transceiver stops and listens to the signal of a programmed

channel, the transceiver will shift to a “dual watch” mode between this

channel and the priority channel. Therefore, your priority watching of the

designated channel is not compromised when the scanner has paused

on an active channel.

5. Hold down the [SCAN] key to change the priority scanning to normal

scanning, and then press the [SCAN] key to stop the scan and return to

normal operation.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 60 61

Comments to this Manuals

No comments

Standard-horizon HX-471S User Manual Page 31

Comments to this Manuals

Related products and manuals for Radio Stations Standard-horizon HX-471S